Smart Tech for your Ride!

Tech9 Ninja ZX6R2017-09-21T01:22:59+00:00

Tech9 Kawasaki ZX6R

Make: Kawasaki

Model: ZX6R 636

Year: 2005

Mileage: 63K+ km

Introduction

Some might think, the Kawasaki ZX6R way back from 2005 is long in the tooth, but nothing stays further from the truth. The 636 lump is rock solid and with a nice tune it punches like a 750 from that era. The suspensions and brakes were pretty good in stock trim too.

Look-wise the double headlight and the round front cowl still has a contemporary feel, although the fatty tail with that tomb-stone-like stock exhaust can had to go a long time ago. Get a neat, short and slim seat unit, mount the exhaust to the side and there goes your new-born supersport racer wannabe.

Top the cake with some cutting edge electronic package including an Android programmable quickshifter and shift light with some cool design and you never ever crave for a new bike at all.

Tech Spec

Engine ›

Samco Racing silicone hose kit
High pressure radiator cap
K&N sport air filter
K&N wrench-off oil filter
Denso sparkplugs
Pair valves removed
Engine Ice coolant fluid
Custom crank case oil catch tank
Valter Moto oil filler cap
Power Commander PCIII with custom tune, each cylinder with individual mapping

Drivetrain ›

Renthal Ultralight front sprocket
Renthal Ultralight Anodised rear sprocket (+2)
D.I.D. ZVM-X 520 Gold chain
DP Clutches High Performance Clutch Kit
Pro-Bolt sprocket nuts
Pro-Bolt chain adjuster blocks
Bridgestone S20 EVO tires

Exhaust ›

Micron Serpent hydroformed stainless steel headers with welded O2 / lambda sensor terminals
Mivv Suono Carbon-Titanium exhaust
Custom connecting pipe
Exhaust servo motor removed
Custom exhaust hanger from stock pillion footrest

Suspension ›

Extreme Tech Tech2 rear shock with remote hydraulic pre-load adjuster
Extreme Tech steering damper

Brakes ›

Accossato PZ04 4 piston/4 pad forged mono-block calipers
Accossato 19×20 radial brake master cylinder with folding lever
Galfer Wave 320 mm oversized front rotors
Galfer Wave rear rotor
Galfer braided brake hoses front+rear
Galfer sintered brake pads front+rear
TRW DOT 5.1 brake fluid
Custom machined 10mm caliper spacers
Icon Moto brake fluid reservoir wrist-band

Controls ›

Accossato clutch perch with folding lever with Motion Pro clutch cable
Motion Pro Revolver quick action throttle
TRW Racing riser clip-ons with 20mm rise + 265 mm wide tubes
Valter Moto Type 2.5 adjustable rear sets
Valter Moto preload adjuster petals

Body & Fairings ›

Puig Racing double bubble clear screen
Evotech mirror block-off plates
Carbon fiber ram air covers
Carbon fiber fender
Carbon fiber frame covers
Carbon fiber tank trim
Carbon fiber rear hugger
Honda CBR1000RR 08 race seat unit
Custom aluminum subframe black powder-coated
Valter Moto Yamaha R6R license plate holder (silver metallic powder-coated)
Custom race seat with carbon fiber look vinyl cover
Keyless racing-look fuel cap
LED taillight
Lightec LED turn signals
Driven Racing D-Axis bar ends
Driven Racing D-Axis paddock stand bobbins
Valter Moto crash bungs and axle sliders
Custom radiator cover mesh grill
Evotech rear axle nut
Lawst Caws frame plugs
Modified front sprocket cover

Design & Graphics ›

Fairings, front wheel and various bits painted in acid-yellow
Engine covers, rear wheel, side stand and various bits silver metallic powder-coated
Circuit board printed clear vinyl wrap
Brushed look semi-gloss anthracite vinyl wrap on front cowl, fuel tank, seat unit and belly pan
Silver metallic glossy vinyl wrap on side fairing, tank lower and seat unit
Lots of HealTech Electronics and Icon Moto decals
Evotech rim stripes
Design by HealTech Electronics

Detail Shots

Cockpit area
Shift Light pro + MultiMeter-5 + GIpro X-type
Keyless fuel tank cap
Powder coated engine cover
SpeedoHealer v4 + QuickShifter easy mounted on Ballistic Performance LiFePo4 battery
QSS Sensor
Accossato master cylinder + Motion Pro Revolver quick action throttle
Accossato calipers with Galfer Wave discs
Accossato clutch perch
LED taillight + Lightec LED indicators + Valter Moto license plate holder
Brake Light pro mounted on subframe
Galfer rear wave disc and braided line
Renthal rear sprocket + D.I.D. chain
Valter Moto Type 2.5 rearset
Mivv Suono end can
Extreme Tech
Carbon covers
Renthal front sprocket + Samco hoses

Related Videos

For privacy reasons YouTube needs your permission to be loaded.
I Accept
For privacy reasons YouTube needs your permission to be loaded.
I Accept
For privacy reasons YouTube needs your permission to be loaded.
I Accept
For privacy reasons YouTube needs your permission to be loaded.
I Accept

Icon_logo_600px
Thanks to Icon Motosport for the co-operation!

This website uses cookies and third party services for best user experience. We DO NOT collect and store any personal data of our visitors. Settings Ok