Brake Light pro

Programmable brake light flasher module

The smallest brake light flasher module in the world with 11 pattern options to choose from for added riding safety. Raises awareness of motorists behind you. No more tailgating thanks to this tiny but intelligent device. Compatible with almost all motorcycles, scooters, ATVs and even cars!



The smallest brake light flasher module on the market just for your own safety. Car drivers are prone of crashing into a bike stopping for traffic lights or pedestrian crossings. A ‘sorry mate, haven’t seen you’ won’t get you and your bike back on the road and even serious accident could occur just because of a careless driver.

Now we got your back with this tiny module! ‘Wakes up’ drivers behind you – no more tailgating! Easy to fit and operate, you can choose from 11 (+ bypass) flash patterns and won’t waste any space on your bike – it’s just so tiny. Get protected today!

About the Brake Light pro

Amazing compatibility!
One module for universal use (3 wire brake light applications, bikes, cars, ATVs) and one specially designed for BMW motorcycles (2 wire LED light support).

Highly Advanced Technology
Touch Sensor for easy setup and maximum reliability. Just cycle through the modes at ease.

Easy set-up!
Locate the brake light wire running under the passenger seat to the taillight. Use the quick wire tap connectors supplied. Shouldn’t take longer than 15 minutes to make it work.

Size DOES Matter!
The smallest programmable intelligent flasher module in the world!

You are in safe hands
The BLP module is built to last with HealTech’s industry leading build quality: all leads are protected against short circuits and high energy transients. Only high quality components have been used, and the epoxy layer construction gives extreme protection for the internal parts from shocks, vibrations and water.


All variants, special editions and BOTH ABS and non-ABS models are supported, except where noted for the selected bike model/year. If you do not see the ABS model or a different model variant listed, it means product fitment is the same as for the standard model.
Suggested retail price:
EU countries › 45,00 EUR
USA and other regions › $54.99

30-day money back guarantee and 2-year replacement warranty from the date of purchase (invoice copy required)

Click here for the list of Distributors

Buy it now!
You can order this product directly from us if there’s no HealTech distributor/dealer in your country.

Buy it now!


Size: 30 x 20 x 13 mm (1.18 x 0.78 x 0.51 inches)
Weight: 28g / 0.98oz (with wiring)

Is there a way to use a physical switch for enabling/disabling the BLP quickly?
Yes, simply install a switch you like, where you like.
The switch current rating must be 5A or higher.

With the BLP-U01, U03, U04:
One pole of the switch must be connected to the BLP Red wire.
The other pole of the switch must be connected to the BLP Green wire.

With the BLP-U02:
One pole of the switch must be connected to the BLP Black wire.
The other pole of the switch must be connected to the BLP Blue wire.

When the switch is ON, the rear light will work as in factory condition.
When the switch is OFF, the rear light will be flashing according to the Mode programmed in the BLP unit.

Our products are supplied with install instructions applicable to all bikes listed for that specific part number. However, to help our customers we are offering Supplementary manuals for some of the popular bikes. If you do not see a manual for your bike, check out one for a similar model and you get the idea what is involved. Most documents are applicable to a wider range of bike models/years than shown here.
Important: The supplied instructions should always be followed carefully.

Brake Light pro flyer